Floor Screed Machine HD 50
1
www.utiform.com
departamento.té[email protected]
Tfno. + 34 96 570 29 82 Fax: + 34 96 570 29 83
INTRODUCTION
Dear Customer:
Please read this instruction manual carefully prior to using your
HD 50/07
and make sure that you
are familiar with the operation and handling of the machine. Avoid handling errors and damage to, or loss of
material.
This machine is the result of the very latest technical developments and complies with all general standards in
force and EC regulations. You will notice the EC symbol on the machine and also the Conformance Declaration
included in this instruction book.
Should the machine break down, or in the event of a replacement request, or if you wish to contact the Technical
Service, please contact your vendor or the dealer directly.
In order to avoid breakdowns caused by faulty or bad quality replacement or wearing parts, and so that you do
not run the risk of losing the “Manufacturer’s Guarantee”, we advise you only to use original spare parts and
wearing parts.
Please complete the details below so that you will know the most important features of your machine and you
will always have them on hand should you need to order spare parts. You will find the technical specifications
on the machine name plate.
HD 50/07
Machine no.
Year of construction
Diesel motor
Compressor
....................…………….......................
....................…………….......................
Type..............................……………......
Serial no...........................………….…..
Type..............................……………......
Serial no. ..........................………….…..
We reserve the right to make any technical amendments required to improve the machine although
they may not be included in this manual
UTIFORM wishes you every success with your new machine.
