Your Reliable Partner in Industrial IoT
UTEK TECHNOLOGY
Page 21
Step 3.
If need to set it as default, click “save & reboot”-“Apply”
7.1.4 UDP Mode
1. Interface Description
Under UDP mode, the interface is shown as below:
2. Keyword Explanations
Operation mode
Operation mode
Connection target IP
address
Set connection target IP address and port number
Frame length
Set frame length
Separator
Set separator
Enable
Enable separator
Separator process
Set separator process
Separator time out
Set separator time out
Local listen port
Set the local listen port number
Apply
Apply the configuration
Apply to all serial ports
If the setting for all the ports are the same, check it
3. Operation Steps
Step 1.
Click “Port config”
Step 2.
Set UDP mode as operation mode, click “Apply”
Step 3.
If need to set it as default, click “save & reboot”-“Apply”
7.1.5 Serial Telnet Mode
1. Interface Description
Each serial port of the server in this mode can be used as the dial-in and dial-out terminal of PPP
service, and it can support the application of remote dial-up access. The interface is shown as below:
