Your Reliable Partner in Industrial IoT
UTEK TECHNOLOGY
Page 16
Active
Enable or disableIP filter
Active NO. x
Enable or disable
Start IP address
Accessible start IP address
End IP address
Accessible end IP address
Apply
Apply the configuration
3. Operation Steps
Step 1.
Click the “Accessible IP”
Step 2.
Set the parameter, click “Apply”
Step 3.
If need to set it as default, click “save & reboot”-“Apply”
6 IP Configuration
1. Interface Description
It can set the IP parameters. The interface is shown as below:
2. Keyword Explanations
IP configuration
Set the configuration mode
IP address
Set IP address
Subnet mask
Set subnet mask
