Your Reliable Partner in Industrial IoT
UTEK TECHNOLOGY
Page 18
3. Operation Steps
Step 1.
Click “Port config”
Step 2.
Set the parameter, click “Apply”
Step 3.
If need to set it as default, click “save & reboot”-“Apply”
7.1 Working Mode
7.1.1 VCOM Mode
1. Interface Description
TCP/IP VCOM mode works under Windows system environment. The port of the serial device server is
mapped into the virtual COM port of the local host through the driver, so that the upper end software
originally based on the operation of COM port does not need to make any modifications, just like the
application of the local real COM port. The driver can support up to COM256 at most. Moreover, each
independent port can support multiple sessions (up to 4 connections), which makes the monitoring of
serial devices more flexible and convenient. And multiple connection resources can also do
connection backup. The interface is shown as below:
2.Keyword Explanations
Operation mode
Operation mode
TCP keep-alive interval
Set the time
Frame length
Set frame length
Apply
Apply the configuration
Apply to all serial ports
If the setting for all the ports are the same, check it
Separator
Set the separator
Enable
Enable the separator
Separator process
Set the separator process
Separator time out
Set separator time out
3. Operation steps
Stop bits
Default is 1, normally it should be the same as the connected device
Flow control
With optional Auto, XON/XOFF, CTS/RTS mode
Operation mode
Select the operation mode
