Your Reliable Partner in Industrial IoT
UTEK TECHNOLOGY
Page 17
Gateway
Set default gateway
DNS server
Set DNS(can set 2 servers)
Prefix
Prefix, default is 64(only for IPV6)
Apply
Apply the configuration
3.Operation Steps
Step 1.
Click “Network”
Step 2.
Set the parameters, click “Apply”
Step 3.
If need to set it as default, click “save & reboot”-“Apply”
7
Port Config
1. Interface Description
It can set the parameters of the serial ports. The interface is shown as below:
2. Keyword Explanations
Explanation
Set the port name
Interface
Port style(RS232/485/422)
Baud rate
Serial port baud rate(it should be the same as the connected device)
Data bits
Default is 8, normally it should be the same as the connected device
Parity
Included None, Even, Odd, Mark, Space, default is N
，
normall it should be the
same as the connected device
