NX-7002N Installation Manual
Page 28
05/06/13
LOCATION 225 HOMETEXT SITE ADDRESS characters 1-16 (16 segments)
This location is used to make a site address easily identifiable by naming it. The site
address name appears at the beginning of each report you receive from HomeText.
LOCATION 226 HOMETEXT SITE ADDRESS characters 17-32 (16 segments)
See location 225.
LOCATION 227 HOMETEXT USER NUMBER FOR PHONES 1 – 16 (16 segments)
For HomeText Control, a user number must be assigned to each phone number. If
HomeText phone number 1 is assigned to user number 1, a command from that phone
number will be logged as User 1. Example : an Arm command from HomeText phone
number 1, will arm the system as User 1.
Note : the user number for phone number 1
must always be ‘1’ (master) in order to have HomeText Control to work properly.
LOCATION 228 HOMETEXT REPORT GROUPS FOR PHONES 1 - 16 (16 segments)
A HomeText report group can be programmed to report specific events to dedicated
phone numbers. Ex. : technical events can be send to service phone numbers while
alarm events are send to the phone number of the owner. Segments 1 to 16 correspond
to HomeText phone numbers 1 to 16 (see location 232). All phone numbers assigned to
a HomeText group will receive SMS messages of reportable events for that group. Any
combination of groups can be set. By default phone numbers 1 to 16 are assigned to
HomeText group 1.
LOCATION 229 MAXIMUM NUMBER OF CONCATENATED SMS MESSAGES FOR SENDING
HOMETEXT MESSAGES FOR PHONES 1 - 16
This sets the number of concatenated (joined together) SMS’s for sending Hometext
reports. The maximum number of concatenated SMS messages is 5. Default is set to 4.
LOCATION 230 - 231 RESERVED
LOCATION 232 HOMETEXT PHONE NUMBER 1 (20 segments)
This sets phone number 1 to which HomeText reports are sent. “14” indicates the end of
the phone number. Program “11” to insert “*” in the phone number, program “12” to insert
“#”and program “13” to insert “+”. It is recommended to add the country prefix before the
number. For e32 followed by the phone number. Phone number 1 does also act
as Admin phone. See location 200.
LOCATION 233 HOMETEXT PHONE NUMBER 2 (20 segments)
This sets phone number 2 to which HomeText reports are sent. See location 232.
LOCATION 234 HOMETEXT PHONE NUMBER 3 (20 segments)
This sets phone number 3 to which HomeText reports are sent. See location 232.
LOCATION 235 HOMETEXT PHONE NUMBER 4 (20 segments)
This sets phone number 4 to which HomeText reports are sent. See location 232.
LOCATION 236 HOMETEXT PHONE NUMBER 5 (20 segments)
This sets phone number 5 to which HomeText reports are sent. See location 232.
Summary of Contents for Interlogic NetworX NX-7002N
Page 15: ...NX 7002N Installation Manual Page 15 05 06 13 ...
Page 55: ...146306999 5 ...
