NX-7002N Installation Manual
Page 10
05/06/13
Once the data is programmed, press the [*] key to enter the data and advance to the next
segment of that location. After the last segment of a location is programmed, pressing the
[*] key will exit that location, turn the “Ready” LED off and the “Armed” LED on. As before,
you are now ready to enter another programming location. If an attempt is made to
program a number too large for a particular segment, the keypad sounder will emit a triple
beep, indicating an error, and remain in that segment awaiting a valid entry.
Remark:
The number in the location will be displayed on the LCD keypad. For locations
with a maximum of 15, the hexadecimal equivalent will be displayed in parenthesis.
Example:
11 (B) or 14 (E).
1.3.2 FEATURE SELECTION DATA
Feature selection data will display the current condition (on or off) of eight features
associated with the programming location and segment selected. Pressing a button on
the keypad (1 through 8) that corresponds to the “feature number” within a segment will
toggle (on/off) that feature. Pressing any numeric key between [1] and [8] for selection of
a feature will make the corresponding LED illuminate (feature ON). Press the number
again, and the LED will extinguish (feature OFF). You will see that numerous features can
be selected from within one segment. For instance, if all eight features of a segment are
desired, pressing [1] - [2] - [3] - [4] - [5] - [6] - [7] - [8] will turn on LED’s 1 through 8 as you
press the keys, indicating that those features are enabled.
LCD keypad users note:
The numbers of the enabled features will be displayed.
However, the features not enabled will display a hyphen (-).
After the desired setting of features is selected for this segment, press the [*] key. This
will enter the data and automatically advance to the next segment of the location. When
you are in the last segment of a location and press the [*] to enter the data, you will exit
that location. This will now turn the “Ready” LED off and the “Armed” LED on. As before,
you are now ready to enter another programming location.
Summary of Contents for Interlogic NetworX NX-7002N
Page 15: ...NX 7002N Installation Manual Page 15 05 06 13 ...
Page 55: ...146306999 5 ...