NX-7002N Installation Manual
Page 12
05/06/13
1.5 Enrolling the SIM card on the GSM network
Insert the SIM card. See
Inserting the SIM card
for more information.
Power up the NX-7002N GPRS module.
Enter programming mode. See
Programming the NX-7002N GPRS module
for more
information.
Press
78#
to select the module.
Press
169#
to enter the
GSM SIM PIN code
location.
Enter the first digit of the SIM PIN code. Press
*
to move to the next segment.
Continue in this way until all digits are programmed. Press
#
to save the changes
and exit the location.
Exit programming mode. The SIM is automatically enrolled on the GMS network.
Note: Each time you exit programming mode, the modem restarts and reads the
PIN number, network operator and SMSC address number from the NX-7002N
configuration.
1.6 Enrolling the SIM card on the GPRS network
Enter programming mode.
Press
78#
to select the module.
Press
169#
to enter the
GSM SIM PIN code
location.
Enter the first digit of the SIM PIN code. Press
*
to move to the next segment.
Continue in this way until all digits are programmed. Press
#
to save the changes
and exit the location.
Obtain an Access Point Number from the supplier. Press
60#
to enter the
Name of
GPRS access point – APN
location. Enter the first digit of the APN. Press
*
to move
to the next segment. Continue in this way until all digits are programmed. Press
#
to
save the changes and exit the location.
(Optional) You may need to enter the PPP password and PPP User ID required by
the network. To do this, press
32#
to select the
PPP (dial-up account) user ID
location and program the password. Then press
34#
to select the
PPP (dial-up
account) password
location and program the user ID. This step is not usually
required.
Exit programming mode. The SIM PIN is automatically enrolled on the GSM network.
Summary of Contents for Interlogic NetworX NX-7002N
Page 15: ...NX 7002N Installation Manual Page 15 05 06 13 ...
Page 55: ...146306999 5 ...
