UTC Fire and Security Interlogic NetworX NX-7002N, Installation Manual

Page: 24 / 55

NX-7002N Installation Manual Page 24 05/06/13
ee A two-digit SIA code.
nnn A three-digit number, e.g. zone number.
Rin Partition modifier, 'Ri' is literal, n is the partition or partition number.
. The message closing character.
/ Separator
[X] X is optional
[X …] X is optional and may be repeated one or more times.
If “3” (Contact ID) is selected, messages are sent using the syntax :
aaaa18qnnnggppp
For example, E9D318113701010
Syntax Description :
aaaa A four-digit account code. Hexadecimal digits A-F are in upper case.
18 To indicate that this is a Contact ID message
q Contact ID Qualifier. ‘1’ = activation, ‘3’ = restore
nnn Three-digit Contact ID event number (decimal).
gg Two-digit group number (decimal). This contains the partition that
generated the event or 0 for a non-partition event.
ppp Three-digit point number (decimal). This contains the zone, user or
module number for the event.
LOCATION 165 SMS 2 PHONE NUMBER (20 segments)
See location 163.
LOCATION 166 SMS 2 FORMAT (1 segment)
See location 164.
Note: By default, not more than 20 SMS messages will be transmitted in a 24 hour
time period. If needed, this number can be changed (see location 162 segment 3).
LOCATION 167 SMS SERVICE CENTRE NUMBER (20 segments)
This number is mandatory when SMS reporting is used. Usually the SIM card
automatically dials this number. “14” indicates the end of the phone number. Program
“11” to insert “*” in the phone number, program “12” to insert “#” and program “13” to
insert “+”. It is recommended to add the country prefix before the number. For example,
+32 followed by the number.
LOCATION 168 UPLOAD/DOWNLOAD PHONE NUMBER (FOR CSD GSM) (20 segments)