manualshive.com logo in svg

Utax CD 1030, Instruction Handbook Manual

Share
Download
Utax CD 1030 Instruction Handbook Manual Download Page 258

Section 9  TROUBLESHOOTING

9-4

(1) Cautions

• Do not reuse misfed paper.
• If paper is torn during removal, be sure to remove all loose scraps

from inside the copier, or they could cause misfeed later.

• After misfed paper has been removed, warm-up will begin. The

Misfeed indicator will turn off and the copier will return to the same
settings prior to the misfeed.

3. When paper misfeeds

If a paper misfeed occurs, a message will be displayed in the touch panel about the misfeed and copying will stop. Leave the power switch ON ( | )
and refer to “(2) Removal procedures” to remove the jammed paper.

Paper misfeed.     Careful for Drum.

1. Open left cover1.
2. Remove paper.
3. Close cover.

JAM 30

1. Open left cover1.
2. Remove paper.
3. Close cover.

JAM 30

Paper misfeed.     Careful for Drum.

Inch specification

Metric specification

 WARNING

High voltage is present in the charger section. Take
sufficient care when working in this area, as there is
a danger of electrical shock.

 CAUTION

The copier’s fixing unit is extremely hot. Take
sufficient care when working in this area, as there is
a danger of getting burned.

(2) Removal procedures

1

1

1

1

1

Misfeed in paper feed section

• Misfeed in drawer[cassette] (JAM 10 to 13, 15 to 17)

If the message below appears, a misfeed has occurred in the
drawer[cassette] (or optional Paper Feeder). Remove the misfed
paper using the procedure given below.

Inch specifications

Paper misfeed.

1. Open cassette1.
2. Remove paper.
3. Set cassette.

JAM 10

Metric specifications

Paper misfeed.

1. Open cassette1.
2. Remove paper.
3. Set cassette.

JAM 10

1

Open the drawer[cassette].

Summary of Contents for CD 1030

































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands