manualshive.com logo in svg

Utax CD 1030, Instruction Handbook Manual

Share
Download
Utax CD 1030 Instruction Handbook Manual Download Page 13

1-1

Caution labels have been attached to the copier at the following locations for safety purposes.
BE SUFFICIENTLY CAREFUL to avoid fire or electric shock when removing a paper jam or when replacing toner.

 CAUTION LABELS

NOTE: DO NOT remove these labels.

Section 1

IMPORTANT! PLEASE READ FIRST.

Label 3

Moving parts inside. May cause
personal injury. Do not touch
moving parts. .................................

Label 2

Do not incinerate toner and
toner container. Dangerous
sparks may cause burn. ......

Label 4

High temperature inside.
Do not touch parts in this
area, because there is a
danger of getting burned.

Label 1

High temperature inside. Do not
touch parts in this area, because
there is a danger of getting burned.

Summary of Contents for CD 1030

































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands