manualshive.com logo in svg

Utax CD 1030, Instruction Handbook Manual

Share
Download
Utax CD 1030 Instruction Handbook Manual Download Page 257

Section 9  TROUBLESHOOTING

9-3

Message

“Out of staples. Add staples.”
[“Stapler empty. Add staples.”]

“Cannot staple this size.”
[“Cannot staple this paper size.”]

“Empty waste punch box.”

“Check the waste punch box.”
[“Check Punch Hole box.”]

“Replace the waste toner box.”

Procedure

There are no staples in the optional Document Finisher. See the Document
Finisher’s Operation Guide and replace the staple cartridge.

Stapling is not possible with small size paper. For details, see the optional Document
Finisher’s Operation Guide.

The hole punch chad container in the optional Document Finisher is full. Refer to the
Operation Guide for your Document Finisher and dispose of the waste hole punch
chads.

The hole punch chad container in the optional Document Finisher is not set properly.
Refer to the Operation Guide for your Document Finisher and set the hole punch
chad container properly.

The waste toner box is filled with waste toner. Replace the waste toner box with a
new one.

Reference

page

——

——

——

——

10-3

2. If one of these indicators lights or flashes

If one of the indicators to the left of the [Copier] key, the [Printer] key, or the [Scanner] key either lights orange or flashes orange, carry out the
appropriate procedure indicated below.

Indication

Lights orange or flashes
orange

Procedure

Check the appropriate response to the
message, and perform the
corresponding procedure.

Reference

page

–

Summary of Contents for CD 1030

































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands