Utax CD 1030, Instruction Handbook Manual

Page: 215 / 288

Section 7 COPIER MANAGEMENT FUNCTIONS
7-79
●
Margin width
Perform the following procedure to determine the default value of the
location and width of the margins in the margin mode.
1 Display the “Copy default” screen.
(See “(5) Accessing the copy default settings” on page 7-61.)
Inch specifications
Default setting
Copy
default
Machine
default
Language Management
End
BOX
Management Bypass
setting
Document
Management Register
orig. size Print
report
Counter
check
User
Adjustment
Default setting / Counter
Metric specifications
Default setting
Copy
default
Machine
default
Language Management
End
Hard Disk
Management Bypass
setting
Document
Management Register
orig. size Print
report
Counter
check
User
Adjustment
Default setting / Counter
2
Select “Default margin width” in the settings list on the left
side of the touch panel and then touch the “Change #” key.
The “Default margin width” screen will be displayed.
Inch specifications
Default setting / Counter
Copy default
Change #
Default setting
Sort
Auto Rotation
Default margin width
Default erase width
Preset limit
Sort : On
Rotate
Left
1 /
4
" 0"
Border 1 /
4
" Center 1 /
4
"
999 Set
Default menu
Down
Setting mode
Up
Close
Metric specifications
Default setting / Counter
Copy default
Sort
Auto Rotation
Default margin width
Default erase width
Preset limit
Sort : On
Rotate
Left 6mm 0mm
Border 6mm Center 6mm
999 Set
Up
Down
Change #
Close
Default setting
Default menu Setting mode
3 Touch the “ O ” key or the “ P ” key, and the “ M ” key or the “ N ”
key, as desired, to change the default margins and margin
widths to the desired setting.
Inch specifications
Left
"
"
(0~ 3 /
4
)
(0~ 3 /
4
)
A d j u s t d e fa u l t s e t t i n g o f m a r g i n w i d t h .
D e fa u l t s e t t i n g - C o py d e fa u l t
Front page
1 /
4
0
Default margin width Close Back
Metric specifications
Default margin width
Back Close
mm
mm
(0~18)
(0~18)
Adjust default setting of margin width.
Default setting - Copy default
Front page
6
0
Left
NOTE
If you want to quit the displayed setting without changing it, touch the
“Back” key. The touch panel will return to the screen in step 2.
4 Touch the “Close” key. The touch panel will return to the
screen in step 2.
5 Touch the “Close” key once again. The touch panel will return
to the “Default setting”screen.
6 Touch the “End” key. The touch panel will return to the
contents of the “Basic” tab.