Utax CD 1016 Instruction Handbook Manual Download Page 105

Page: 105 / 122

9-1

Section 9

MAINTENANCE AND OPERATION

INFORMATION

Cleaning the Original Cover

Open the Original Cover and use a cloth dampened with alcohol or
a dilute neutral detergent to clean the underside of the Original
Cover.

IMPORTANT!

Do not use thinner, organic solvents etc.

Cleaning the Platen

Open the Original Cover and use a cloth dampened with alcohol or
a dilute neutral detergent to clean the Platen.

IMPORTANT!

Do not use thinner, organic solvents etc.

Cleaning the Slit Glass

When black streaks appear on copies when using the optional
Document Processor, this means that the Slit Glass

(a)

is dirty.

Use a soft dry cloth to clean the slit glass.

IMPORTANT!

Do not use water, thinner, organic solvents, alcohol, etc.

* Refer to P.9-4

"Replacing the Toner Container and Waste

Toner Box"

for instructions for cleaning the inside of the copier.

Cleaning the Copier

CAUTION

Remove the power plug from the outlet during

cleaning operations as a safety precaution.

(a)

Summary of Contents for CD 1016



























































































































Search results

Summary of Contents for CD 1016

Reviews:

Related manuals for CD 1016

Brands by name

Popular brands

Utax CD 1016, Instruction Handbook Manual

Search results

Summary of Contents for CD 1016

Reviews:

Related manuals for CD 1016

Brands by name

Popular brands