USC U-Batch, Operator'S Manual

Page: 50 / 118

Page 50
U-BATCH™ TREATER
ALARMS SCREEN
When a fault or warning condition is detected by the system, an Alarm popup screen
will appear describing the cause of the alarm or fault. If running, the system will then
progress to the pause state. When the fault condition is resolved, press the Reset &
Close button, the alarm will be cleared and removed from the screen. This may also
be done on the Alarms screen.
1. VFD RESET BUTTON:
Pressing this button advances the operator to the VFD
Fault Message screen (page 51, top). The text in the white box will describe the last
VFD fault. Press the red Reset the VFD Fault button below the message window.
After the VFD has reset, the button will return to grey and indicate No VFD Fault.
1 2 3