USC U-Batch, Operator'S Manual

Page: 45 / 118

Page 45
U-BATCH™ TREATER
SETPOINTS 1 SCREENS
1. FLOW METER TYPE:
Pressing this button toggles between Volumetric, Mass
and Custom flow meter options to match the type of flow meter being used with your
equipment. If using a Non-USC type pump, it would be set to custom activating the
Custom PID Settings button (see page 46).
2. PUMP TYPE:
Pressing this button toggles between Low Flow, Base Flow and
High Flow. The low flow setting is configured for the low flow peristaltic pump
assembly. The base setting is configured for one of the three standard pump
configurations. When set to base flow, the # of pumps heads button must be set
to ether 1, 2 or 3 to match the number standard peristaltic pump heads installed.
The high flow setting is configured for the high flow peristaltic pump assembly.
3. # OF PUMP HEADS:
Pressing this button toggles between 0, 1, 2 and 3 to be set
to the number of peristaltic pump heads are on the pump stand.
1 3
2