USC U-Batch, Operator'S Manual

Page: 11 / 118

Page 11
U-BATCH™ TREATER
SAFETY LABELS
1. Keep safety labels clean and legible at all times.
2. Replace safety labels that are missing or have become illegible.
3. Replaced parts that displayed a safety label should also display the current label.
4. Replacement safety labels are available. Contact USC at (785) 431-7900 .
How to Install Safety Labels:

Be sure that the installation area is clean and dry.

Be sure temperature is above 50
o
F (10
o
C).

Decide on the exact position before you remove the backing paper.

Remove the smallest portion of the split backing paper.

Align the sign over the specified area and carefully press the small portion with
the exposed sticky backing in place.

Slowly peel back the remaining paper and carefully smooth the remaining
portion of the sign in place.

Small air pockets can be pierced with a pin and smoothed out using the piece
of sign backing paper.
Part # 09-02-0002
Think SAFETY! Work SAFELY!
REMEMBER
—
If safety labels have been damaged, removed, become illegible, or
parts replaced without safety labels, new labels must be applied. New safety labels are
available from USC at (785) 431-7900.