US Robotics 3CP5695 User Manual Download Page 91

Page: 91 / 100

Bit-Mapped Registers

128

Disable V.42 operation.
Note:To disable V.42

detect phase, select sum of

bits 3 and 7 (in other words
S15 = 136 [8 + 128])

Table6-6

Settings for S27

Bit Value Result

Enables ITU-T V.21

modulation at 300 bps for

overseas calls; in V.21
mode, the modem answers

both overseas and

domestic (U.S. and
Canada) calls, but only

originates V.21 calls

(default Bell 103).

Enables unencoded
(non-trellis coded)

modulation in V.32 mode.

Disables V.32 modulation.

Disables 2100 Hz answer

tone to allow two V.42
modems to connect faster.

Enables V.23 fallback

mode.

Disables V.32bis mode.

Disable V.42 selective

reject.

128

Software compatibility
mode. This setting disables

the codes and displays the

9600 code instead. The
actual rate of the call can

be viewed on the ATI6

screen. Used for unusual
software incompatibilities.

Some software may not

accept 7200, 12,000, and
14,400 bps or greater

result codes.

Table6-5

Settings for S15

Bit Value Result

Summary of Contents for 3CP5695





































































































Search results

Summary of Contents for 3CP5695

Reviews:

Related manuals for 3CP5695

Brands by name

Popular brands

US Robotics 3CP5695, User Manual

Search results

Summary of Contents for 3CP5695

Reviews:

Related manuals for 3CP5695

Brands by name

Popular brands