16
12.Image Manager
12.1 Select Image
To select Image file as Sources to be copied to discs.
12.2 Disc==> Image
To copy Source Disc to HDD and save as Image file.
12.3 Reader Speed
ONLY when performing 12.2 Disc -> Image function, you can set
the Reading Speed of reading the master source disc.
12.4 Show Image
Info
To check image file information and file size.
12.5 Rename Image
Change the name of an image file stored on the HDD.
12.6 Delete Image
To delete image file in HDD. If the file is selected as source file,
you are not able to delete it unless you go back to 12.1 to re-select
the image.
12.7 Show HDD Info
To check the information in HDD, such as how many discs are
stored and HDD available space.
12.8 Format HDD
This feature will allow you to format the HDD. However, you will
not be able to format the HDD if the HDD image was selected as
source.
12.9 Load & Copy
Consolidates the imaging and burning process into one step.
Image Manager is only available on towers equipped with a Hard
Drive.
13.Link Setup
13.1 Set My Position
Choose what position the tower has in the array. Choices are first,
middle, last, and stand-alone.
13.2 Start Link
Open the connection to one or more towers.
13.3 Update BIOS
Allows you to update the firmware on the same tower.
13.4 Synchron-BIOS
Allows all towers in the array to be updated to the newest
firmware revision.
Link Setup is only available on Accutower Daisy Chain &
Accutower Unlimited Series towers.
