25
11.6 Skip Read Error
Choose whether or not to display an error message when the source drive is reading a disc.
Select 11. Setup and press ENT
Select 6. Skip Read Error and press ENT
Press
,
to turn Skip Read Error on or off and press ENT
11.7 Eject on Start
This function lets you choose which drives to eject when the tower is turned on for the first time. It
can save time when making high volume copies on a regular basis.
Select 11. Setup and press ENT
Select 7. Eject on Start and press ENT
Press
,
to choose between Eject All Discs, Do Not Eject, Eject Target Only, or Eject Source
Only. Press ENT when finished.
11.8 Show Copy Time
This function will choose whether or not to display a summary of the burn time.
Select 11. Setup and press ENT
Select 8. Show Copy Time and press ENT
a. Press ,
to choose Enable or Disable and press ENT
11.9 Reader Speed
This setting allows you to change the speed of the source drive for disc-to-disc copying only.
Slower settings will typically result in better quality burns.
Select 11. Setup and press ENT
Select 9. Reader Speed and press ENT
Press
,
to change the desired speed and press ENT
11.10 Compare Speed
This setting allows you to change the Compare Speed of the drives.
Select 11. Setup and press ENT
Select 10. Compare Speed and press ENT
a. Press ,
to change the desired speed and press ENT
