19
5. VERIFY
This operation will check your master discs and the copied disc’s readability to make sure all of
your copies are readable.
a.
Put master source disc and all copied discs into the duplicator
b.
Press ENT and the duplicator will start loading disc, analyzing source disc and start
verification.
c.
When verification is finished, the writer trays will eject.
6. COMPARE DISC
This is to make a bit-by-bit comparison between Master Reading Source and all the copied discs
inside the writer tray. This operation is to ensure all of your copies have the exact same information
as your Master Reading Source.
a.
Put master source disc and all copied discs into the duplicator.
b.
Press ENT and the duplicator will start loading disc, analyzing source disc and start
comparison.
c.
When the comparison is finished, the writer trays will eject.
Note:
7. SET BURN SPEED
This operation will allow you to adjust the burn speed for three different disc types: CD, Audio
CD, and DVD.
a. Move to navigate to function 7. SET BURN SPEED, and press ENT
b.
You will see three disc types of CD, Audio CD, and DVD. Move
,
to change disc
type and press ENT to confirm your selection. Press
,
to select burn speed.
The Compare function works only with data discs, and NOT with Audio
CD’s.
