13
4. Menu Overview
1.Copy
This is to make CD/DVD copies. Before you start copying, please
make sure you have set the correct source drive and blank discs.
The system will detect and display how many blank discs were
inserted. When the system is ready, just press ENT to begin
making CD/DVD copies
2.Test
This is Copying Process Simulation. The process is the same as
COPY, but it won’t write anything to the recordable disc. The
purpose of this process is to ensure error free duplication
3.Copy & Verify
This operation will make copies and after the copy process has
been finished, it will perform a verification process to ensure data
correctness
4.Copy & Compare
This operation will make copies and after copy process has been
finished, it will perform a comparison process to ensure data
correctness.
5.Verify
This operation will check your master discs and the copied disc’s
readability to make sure all of your copies are readable
6.Compare
This is to make a bit-by-bit Comparison between Master Reading
Source and all the copied discs inside the writer tray. This
operation is to ensure all of your copies have the exactly same
information as your Master Reading Source.
7.Set Burn Speed
This operation will allow you to adjust and select duplication
speed when burning CDs, Audio CDs, and DVDs
8.Select source
Allows the user to change the Master Reading Source as Optical
Drive or Hard Drive Disk.
9.Track Edit
This is to make Audio Tracking Selection. This will help you to
combine audio tracks from various CDs into a single customized
audio CD.
Chapter
4
