DS1093-520
37
3.4.4.6
FTP
The last available item in the Network section concerns the configuration parameters to access a FTP server on which to
load the images and the recordings acquired following an alarm detected by the DVR. The options are shown under the
following figure:
•
FTP Enable:
select the required option to enable or disable operation.
•
Server IP:
enter the address IP (only numeric format) of the FTP.
•
Port:
FTP service port. Default value: 21.
•
Username
: user name to access the FTP.
•
Password:
password for accessing the FTP server.
•
Directory Name:
name of the folder in which to transfer the recorded images or motion alarms.
•
FTP TEST:
click on the FTP TEST button to check operation of the configuration.
Summary of Contents for Hybrid DVR 1080N Series
Page 107: ...DS1093 520 107...
