urmet domus Hybrid DVR 1080N Series, User Manual/Instructions

Page: 21 / 108

DS1093-520 21
3.4.1.3 Live
This page of the Display menu can be used to configure the parameters related to the <Live> screen of the DVR. As
shown in the following figures, the available options may be different if an analogue channel is being configured (figure on
the left) or an IP camera (figure on the right).
Common options:
•
Channel: allow you to setup the channel you desired.
•
Channel Name: allow you setup the channel name, and system support up to eight characters.
•
Show Name: allow you enable system name appear in the <Live> screen.
•
Record time: When set to “Enable”, the playback stream shows the record time label.
•
OSD Position: clicking on the labels allows you to move the display position of each channel.
•
Color: Click [Setup] option to enter into the [Color setup] interface as shown in the following paragraph.
•
Covert: allow you enable the Channel in Live surveillance screen.
•
AHD EQ: IF EQ is enabled and the connected AHD Camera supports the equalization function, the image quality
might be improved.
•
Show time: allow you to enable system time appear in the <Live> screen.
•
Copy: allow you to copy all data of one channel to any other one.
Options available for analogue channels only:
•
AHD EQ: image quality can be improved if EQ is enabled and the connected AHD camera supports the
equalisation function.
•
Copy: this is used to copy all data from one channel to another.
Options available for IP cameras only:
•
Date Format: this is used to set the data format on the screen; possible values: MM/DD/YY, YY/MM/DD,
DD/MM/YY.
•
Time Format: this is used to set the time format on the screen; possible values: 12 Hour, 24 Hour.
•
Refresh Rate: this is used to select the image update frequency; possible values: 50 Hz, 60 Hz.