DS1093-520
18
3.4.1
DISPLAY
The first subsection in the Parameters section concerns screen configuration, i.e. all the settings referred to the DVR
camera image display. They will be described in detail in the following paragraphs.
3.4.1.1
Analog Channels
Use this menu page to enable/exclude the available analogue channels (four for model 1093/504N, eight for model
1093/508N and 16 for model 1093/516N). The various cameras supported on all analogue channels are: Camera AHD
1080N, Camera AHD 720P and Camera 960H.
The list of available analogue channels with the respective state is shown in the central part: Enable, Disable. Check the
corresponding box to change the state of a single channel; click on the “Analog Channels" box to do the operation on all
available channels. Press the "Save" button to confirm the changes made.
Warning:
the system must be rebooted to enable or exclude one or more analogue channels.
NOTE:
For each disabled analogue channel, the bandwidth will be increased by additional 3Mbps for each
added IP channel.
3.4.1.2
IP Channels
The IP cameras are configured by selecting IP Channels on the side menu. The four buttons on the lower part of the page
can be used to add or eliminate cameras in the system.
Press [Auto Assign Channels] or [Add All] to quickly add IP cameras present in the DVR LAN (the IP address is assigned
automatically is this case); press the [Channel Delete] button to eliminate the cameras selected in the list and press the
[User-defined Add] button to search for cameras on the LAN and add only the required ones (see the following paragraphs
for details on how to do this). Click on
to manually add a camera to the system of the list of available channels.
In all cases, you will need to enter the camera access password (admin for default settings) and then confirm the
operation.
Summary of Contents for Hybrid DVR 1080N Series
Page 107: ...DS1093 520 107...
