DS1093-520
100
8 RECORD ALARM SETTING
Please refer the below matrix: “
⊥
” stand for “only alarm but no record”; “AMR” stand for “alarm record”; “NLR” stand for
“normal record”; and “NOR” stand for “ no record”. Once alarm is triggered, alarm icon will occur, and when many alarms
are triggered, alarm remarks will occur on the screen.
Record alarm setting
Alarm icon
Record Mode
Record after
power on
Scheduled recording
Manual Record
AMR
NLR
NOR
Alarm
mode
MD alarm
NLR
AMR
NLR
⊥
NLR
HDD loss, HDD Full
⊥
⊥
⊥
⊥
⊥
Video Loss
Video Loss
⊥
⊥
⊥
⊥
⊥
In the record mode, [
] icon will appear on the screen. But when [
] red icon appear on the screen that means a sensor
and/or motion alarm is triggered and DVR is recording the Alarm Events, instead if the icons are green colour it means
that a sensor and/or motion alarm is triggered but DVR is not recording the Alarm Events. When [
] icon appears on the
screen, that means HDD alarm has occurred.
9 TROUBLESHOOTING
1.
Q: What can I do if the system does not detect the HDD?
A: Check if the power supply system is properly connected and data cord and power cables are securely connected,
and if something wrong with the HDD interface. Or you may check if your HDD is supported by referring to the
specifications or descriptions.
2.
Q: I have changed the password but forget the new password, how can I access the system?
A: If you forget system password, please consult with our technical personnel. We strongly suggest user to set
password easy to be remembered and relatively safe. If you have safety requirement, please do not set very simply
password, such as 000000.
3.
Q: Is it possible to add IP camera with different protocols?
A: Yes it is. The DVR is able to recognize automatically the right protocol.
4.
Q: Is it possible to control AHD cameras through UTC or UTC-Z function?
A: Yes it is, An OSD is displayed pressing [Iris] or [Central Enter] buttons, the arrows key allow to navigate into
menu.
5.
Q: We see abnormal video signal or even no video signal by connecting the DVR and camera together. Power
supply for both devices is OK. What is wrong?
A: Check network cable at DVR side to see if the cable is firmly connected and if it is worn out and needs to be
replaced, or to check if NTSC or PAL is selected consistently.
6.
Q: How to prevent DVR from being influenced by heat?
A: The DVR needs to dissipate heat while it is running. Please place the DVR in a place with good air circulation and
away from heat sources to ensure stability and life of the DVR.
7.
Q: The remote controller of DVR doesn’t work while the monitor screen is OK and panel keys are functional. Why?
A: Operate again by aiming the remote controller at the IR receiver on front panel. If it still doesn’t work, please check
if the batteries in the remote controller are dying. If not, check if the remote controller is broken.
8.
Q: I want to take out HDD from my PC and install it in DVR. Can it work?
A: All HDDs supported by the system can be used. But remember, once DVR runs, the data on your HDD will be lost.
9.
Q: Can I playback while recording?
A: Yes. The system supports the function of playing while recording.
10. Q: Can I clear some records on HDD of DVR?
A: In consideration of the file security, you may not clear part of records. If you want to remove all the records, you
can format HDD.
11. Q: Why can’t I log in DVR client?
A: Please check if the network connection settings are correct and RJ-45 port is with good contact. And check if your
account and password are correctly input.
12. Q: Why can’t I find any records during playback?
A: Please check if the data line connection for HDD is OK and system time is properly adjusted. Try a few times and
restart. If it still doesn’t work, check if the HDD is broken.
Summary of Contents for Hybrid DVR 1080N Series
Page 107: ...DS1093 520 107...
