sec.3g
−−−−
19
2 VOICE - Technical Manual
ELEKTA AND ELEKTA STEEL CALL MODULE
2VOICE ELEKTA CALL MODULE Ref. 1083/15 (50Hz) – 1083/25 (60Hz)
2VOICE ELEKTA STEEL CALL MODULE Ref. 1083/16 (50Hz) – 1083/27 (60Hz)
ANNEX
CALL MODULE OPERATION IN SIMPLIFIED GUI
MODE
In order to use SIMPLIFIED GUI a person
wanting to call from the calling module
must know the name of the block of the
apartment and the number assigned to
the apartment to be called. For example,
apartment
234
in
BLOCK A
.
When the SIMPLIFIED GUI mode is
active, calls to apartments are made as
follows:
Press the
buttons to access the
list of blocks that the calling module
is enabled to call.
The blocks are
sorted in alphanumeric order by
name
.
Press the
buttons to highlight
the name of the block to which the
apartment to be called belongs.
Press
OK
to con
fi
rm the selection.
Key in the number of the apartment to
be called using the numeric keypad
and press the
or
OK
button to
con
fi
rm.
—
—
—
—
Select the block to which the apartment
to be called belongs using the
buttons and press
OK
to con
fi
rm.
Key in the number of the apartment to be
called on the calling module panel. The
number will appear on the screen.
Press the
or the
OK
button to send
the call.
If SIMPLIFIED GUI mode is
chosen on a calling module
con
fi
gured to call a single
block, simply key in the number
assigned to the apartment and
press the
OK
or
button to
call.
The list of blocks will not be
shown if only one block is
present because this is the only
block that can be reached by
the calling module.
The user can also use the following
commands or actuations that are
described in the following points:
Opening the door using a door code
Opening the door using a transponder
key
Opening the door using the postman
function
Calls to switchboard
Auto-on function
Special codes
•
•
•
•
•
•
