sec.3g
−−−−
15
2 VOICE - Technical Manual
ELEKTA AND ELEKTA STEEL CALL MODULE
2VOICE ELEKTA CALL MODULE Ref. 1083/15 (50Hz) – 1083/25 (60Hz)
2VOICE ELEKTA STEEL CALL MODULE Ref. 1083/16 (50Hz) – 1083/27 (60Hz)
HOW TO USE A CALLING MODULE
Select the name using the
buttons
and press the
button to make the call.
Hold the button pressed for longer than
one second to scroll the names quickly.
The keypad can be used to make the
search faster. Enter the initials of the
name, select the name from the displayed
list using the
buttons and press the
button to make the call. Press
C
to
delete mistakes made while keying in.
Conversations and busy conditions are
managed in the same way as in calls by
means of codes. Refer to the respective
section for more information.
OPENING THE DOOR USING A DOOR CODE
The home page of the calling module is
shown here by the side.
The options “SELECT NAME WITH
AND PRESS
” and “FOR
SWITCHBOARD PRESS
” will
only be present if names are stored
in the repository and if a door phone
switchboard is con
fi
gured on the calling
module.
Press the
button once.
Enter the door opener code and press
OK
to con
fi
rm.
Press
C
on the short-cut menu to enter
the digit to the left of the cursor if you
make a mistake. The cursor can be
moved onto the numeric string using the
and
buttons.
Press the
X
button to go back to the
home page.
A page containing an error message will
appear for two seconds if an incorrect
code is entered.
If the code inserted is correct, the calling
module will open the door. The message
shown here by the side will appear on the
display.
If the opening times of the door openers
1 and 2 are both longer than 0 seconds,
the following screen appears, where you
will be prompted to press button 1 or
button 2 to select the door to be opened
(typically 1 = pedestrian door, 2 = vehicle
entrance).
OPENING THE DOOR USING A TRANSPONDER
KEY
(FUNCTION AVAILABLE ONLY FOR MODELS 1083/15 AND
1083/16)
Pass the transponder key near the reader
on the calling module. This operation may
be carried out also during a conversation
with an apartment station.
The message shown here by the side will
appear for two seconds if the key is not
valid.
If the key is valid, the calling module will
open the door. The message shown by
the side will appear on the display.
If the opening times of the door openers
1 and 2 are both longer than 0 seconds,
the following screen appears, where you
will be prompted to press button 1 or
button 2 to select the door to be opened
(typically 1 = pedestrian door, 2 = vehicle
entrance).
OPENING THE DOOR USING THE POSTMAN
FUNCTION
Press the button
T
or
P
selected during
con
fi
guration.
The button will appear only for the time
during which the postman function is
enabled.
