DS1092-121
95
Option
Value
Explanation
ACTION
PATTERN/PANSCAN/AUTOSCAN
/PRESET/VECTORSCAN/AUTO
TRACK
This function permits selection of the action to be combined
with one of the available alarm contacts. The AUTO TRACK
function is available only on Ref.1092/674 and 1092/675
NUMBER
PRESET: 1/200
VECTORSCAN: 1/6
PATTERN: 1/3
PANSCAN: 1
AUTOSCAN: 1
This option allows to define in detail which single action has to
be activated. The single action number that can be selected
changes according to the previously selected action (from 1 to
200, except the not programmable ones for the Presets; from 1
to 6 for VectorScan; from 1 to 3 for Patterns, 1 for PanScan, 1
for AutoScan). The selection of the desired number is possible
by pressing the button IRIS+ and going to the respective
screen.
DWELL TIME
1/999
This option allows to define the activation time (in seconds) of
the alarm output.
4.5.5.8
TEMPERATURE PROG submenu of FUNCTION PROGRAMMING menu
This option allows to select the temperature limit, over which the dome, to keep its integrity, stops operating; when the
temperature reaches again the values defined by the user, the dome starts operating again.
It is possible to select positive or negative temperatures, according to place and environment where the dome is
installed.
Option
Value
Explanation
DISPLAY ON/OFF
If enabled (ON), this function allows to see on the monitor the
current operating temperature of the dome.
POWER OFF TEMP
This option allows to select the max. operating temperature of the
dome, over which it automatically turns off. Press the button IRIS+
to go to the respective submenu where it is possible to set the
temperature.
ACTION SETUP
1 Action Pattern
2 Number 1
3 Dwell Time 20SEC
TEMPERATURE PROG
1 Display ON
2 Power Off Temp 85°C
Summary of Contents for Easy Dome IV 1092 Series
Page 115: ...DS1092 121 115...
