14
DS4091-002
15
DS4091-002
Fit the spacer on the telephone base underneath the line cord in the specifi c grooves.
Plug the short end of the spiral cord into the handset connector and the other end into the connector with the
symbol on the base of the telephone.
Carefully arrange the fl at end of the spiral wire in the groove obtained on the base of the telephone.
4091/14
3 Remove the handset hook by pressing on the
tabs.
2 Install the spacer on the base of the telephone
as shown in the following fi gure.
1 The telephone can be installed on the wall using
two 5mm bolts (included) at the specifi c slots on
the back of the telephone. Use the template in
the telephone box for drilling the wall. Let the
screws protrude from the wall by approximately
5mm.
2.2 WALL-MOUNTED CONFIGURATION
4091/14
4 Insert the hook turned by 180° in the seat so
that it can hold the handset.
5 Connect the line and the handset as shown in paragraph 2.1.
6 Apply the telephone onto the wall so that the heads of the screws fi t inside the wide hole in the slots and
lock the telephone by moving it vertically downwards.
✱
✱
The handset can be arranged on top
of the wall-mounted telephone to put
the caller on hold.
