12
DS4091-002
13
DS4091-002
DIRECT FUNCTION
(DEFAULT SETTING)
Fn BUTTON
SECOND FUNCTION
Fn BUTTON
THIRD FUNCTION
Fn BUTTON
BUTTON
CALL EXTENSION 2 - This function
allows to directly call the telephone
connected to extension 5 of the
switchboard (default setting: 42).
MISSED CALLS - This function is used to
display the missed (unanswered) calls.
CALL EXTENSION 10 - This
function allows to directly call the
telephone connected to extension 5
of the switchboard
(default setting: 50).
CAPTURE CALL - This operation is used
to divert a call after it has been established
with an answering machine or fax machine
to your extension.
CALL EXTENSION 3 - This function
allows to directly call the telephone
connected to extension 5 of the
switchboard (default setting: 43).
BOOK - This function is used to make a
call when either the called extension or
dial line is busy.
-
-
-
CALL EXTENSION 11 - This
function allows to directly call the
telephone connected to extension 5
of the switchboard
(default setting: 51).
DOOR OPENER - This function is used to
open the second door.
CALL EXTENSION 4 - This function
allows to directly call the telephone
connected to extension 5 of the
switchboard (default setting: 44).
ALARM - This function is used to operate
the telephone ringer at a certain time.
CALL EXTENSION 12 - This
function allows to directly call the
telephone connected to extension 5
of the switchboard
(default setting: 52).
ALTERNATE DIAL LINE - You can also
switch between conversations, i.e. speak
with one caller and kept the other caller
on-hold.
QUERY ALARM - This
function is used to check
the programmed time.
-
-
The SECOND and THIRD function buttons are not confi gurable and are specifi c for Agorà 6
switchboard functions.
1.8 LEDS
The optical indications output by the LEDs associated to the CUSTOMISABLE BUTTONS identify the status
of a telephone line or extension (providing that the customisable button is associated to a dial line or
extension).
LED INDICATION
OFF
DIAL LINE FREE
ON
ON FOR FOUR SECONDS
FUNCTION CONFIRM
ON AND OFF BRIEFLY
PARKED LINE
SLOW BLINKING
LINE STANDING BY
FAST BLINKING
BUSY LINE
CALL RECEPTION LINE
MEANING
2. INSTALLATION
The telephone may be installed on a table top or on the wall.
2.1 TABLE-TOP CONFIGURATION
After identifying the surface where to install the telephone, fasten the telephone socket considering the length
of the line cord supplied. Fasten the socket and connect to the switchboard.
SOCKET
TERMINALS
ITEM
SWITCHBOARD
TERMINAL
GREEN WIRE
TEL. EXTENSION
TELEPHONE
CONNECTION
RED WIRE
TEL. EXTENSION
BLACK WIRE
SE -
DATA
LINE
YELLOW WIRE
SE +
1
2
3
4
1
2
3
4
SWITCHBOARD
TELEPHONE
SOCKET
(internal view)
Maximum
distance:
250 metres
Disconnect switchboard power
before connecting.
Connection of other downstream devices
(e.g. modems) is not recommended
because correct operation of the
telephone cannot be ensured in
this case.
When replacing Urmet Domus Team
and Euro telephones, reverse the
SE+ and SE- signals in sockets of
the existing system.
LINE
CORD
Plug one end of the line cord into the
telephone socket and the other end into
the telephone LINE socket.
Carefully arrange the line code
in the groove on the bottom of
the telephone.
