UPS ZINTO A 1000, User Manual

Page: 99 / 181

9. Operation
1.) The battery must be fully charged for correct operation.
You will find the charging time in section 11.2. The UPS
system can also be used immediately without charging,
however in this case the power backup time may be
shorter than the nominal value stated.
2.) Prior to ust be ensured the output voltage
from the
compute
from the
using the soft
operation it m
UPS system matches the input voltage on the
r connected (as a rule 230V). The output voltage
UPS system can be set on the control panel or
ware.
3.) The computer is to be connected to the UPS output socket
using the 10A extension cable supplied.
ATTENT
sockets that will overload the UPS (e.g. laser
printers). Also do not connect any household
ION:
Do not connect any devices to the UPS output
ap-
pliances to the UPS.
9.1 Operating modes
ZINTO A has two operating modes: normal mode and battery
mode .
1.) Normal mode:
The UPS system operates in the n
p
ormal mode if the primary
p su ly voltage is within the stipulated tolerance. During this
process the built-in battery charging rectifier keeps the battery
fully charged. At the same time the inverter is in the ready
mode.
99 / 181
Manual-ZintoA_final_ger_engl_it_20090929.doc
30.09.2009, Dipl.-Ing. S. Spitzley