UPS ZINTO A 1000, User Manual

Page: 72 / 181

Connection / electrical safety
•
Never work alone in dangerous conditions.
•
cting cables.
the output cable con-
•
nces such as hair dryers
•
Op
•
Always ensure that plugs, wall sockets and input cables are
in good working order.
•
Connect the UPS system only to an earthed wall socket
with earth contact.
•
Pay attention to maximum current drawn and ensure the
building wiring is adequately fused.
•
The wall socket (with earth contact) must be easily acces-
sible and close to the UPS system.
Only use VDE-tested and CE-marked conne
•
As specified by the EMC directive,
nected to the UPS must not exceed a length of 10m.
Do not connect household applia
to UPS output sockets.
Do no
•
t connect any devices that will overload the UPS (e.g.
laser printers) to the UPS output sockets.
Lay cables in such a way that no one can step on or trip
over them.
eration
•
Do not disconnect the mains cable from the UPS system or
the wall socket (with earth contact) during operatio
this would remove the protective earth on the UPS n, since
•
es its own, internal power source
et
•
To completely shut down the UPS system, press
system
and on all connected loads.
The UPS system featur
(batteries). The UPS output sockets may be electrically live
even if the UPS system is not connected to the wall sock
or the mains supply.
for at
least 3 sec. and then unplug from the mains.
72 / 181
Manual-ZintoA_final_ger_engl_it_20090929.doc
30/09/2009, Dipl.-Ing. S. Spitzley