is inactive, it can be reactivated by pressing
TEST
again
for one second.
NOTE:
The acoustic alarm cannot be
battery low, overload, fan failure / fault, time
down, overtemperature.
switched off in the
following situations:
shut-
If a fault is found during the system diagnostics given above,
process is interrupted immediately
t
n
he
and the loads con-
ected switched to the
normal mode
without delay. The cause
of the fault is output on the indicator panel. You will find more
information in section 10.
ATTENTION:
Faults must be rectified. If ignored there is a risk
of loss of functionality.
NOTE:
ONLINE hotline: +49 (0) 89 / 2 42 39 90 18
Da
You can al
oftware. You will find more information on this aspect in the
taWatch software:
so run a remote battery test via the DataWatch
s
separate operating instructions on the DataWatch CD.
104 / 181
Manual-ZintoA_final_ger_engl_it_20090929.doc
30.09.2009, Dipl.-Ing. S. Spitzley
Summary of Contents for ZINTO A 1000
Page 2: ...2 181 Manual ZintoA_final_ger_engl_it_20090929 doc 30 09 2009 Dipl Ing S Spitzley ...
Page 62: ...62 181 Manual ZintoA_final_ger_engl_it_20090929 doc 30 09 2009 Dipl Ing S Spitzley ...
Page 64: ...64 181 Manual ZintoA_final_ger_engl_it_20090929 doc 30 09 2009 Dipl Ing S Spitzley ...
Page 122: ...122 181 Manual ZintoA_final_ger_engl_it_20090929 doc 30 09 2009 Dipl Ing S Spitzley ...
