UPS ZINTO A 1000, User Manual

Page: 92 / 181

8.1.2 Installation of UPS plus Batterypack
Additional batterypacks are available for all models in the
ZINTO A series from 1500VA.
To install the UPS and batterypack, please proceed as de-
scribed in section 8.1.1.
Prior to the connection of additional batterypacks, the UPS
system is to be isolated from the mains and the loads are to
be isolated from the UPS system.
The connection between control unit and batterypack (or be-
tween batterypacks) is made using the connectors. It is im-
perative the connection is then checked for correct seating.
8.1.2.1 Batterypack for ZINTO A 1500 and ZINTO A 2000
There is a socket for the connection of additional batterypacks
both
.) The battery cable for the first batterypack is to be con-
, the
on the UPS control unit and on the batterypack.
1
nected to the socket on the rear of the UPS.
2.) On the use of more than one additional batterypack
cable for the second batterypack is connected to the spare
socket on the rear of the first batterypack.
3.) For more than two batterypacks, proceed as given in step
2.) as appropriate.
Figure 17: Connection ZINTO A 1500 Batterypack,
ZINTO A 2000 Batterypack
92 / 181
Manual-ZintoA_final_ger_engl_it_20090929.doc
30.09.2009, Dipl.-Ing. S. Spitzley