UPS ZINTO A 1000, User Manual

Page: 71 / 181

5. Safety instructions
BEFORE INSTALLING THE DEVICE AND STARTING IT UP,
READ CAREFULLY AND OBSERVE THE USER MANUAL
AN
CTIONS! D SAFETY INSTRU
nsport Tra
•
Please only transport the UPS system in the original pack-
aging (to protect against shock and impact).
Set-up
Du
ple e to its weight, the UPS needs to be installed by two peo-
.
is device is intended to be installed in a tempera Th ture-
on
tion
•
irst time.
•
ht or near
n the UPS system’s
controlled room free of conductive substances. For information
the necessary ambient conditions, please refer to sec-
11.3.
Condensation may occur if the UPS system is moved from
a cold environment to the working area. The UPS system
must be absolutely dry before starting up for the f
For this reason allow an acclimatisation period of at least
two hours.
•
Do not install the UPS system near water or in damp envi-
ronments.
Do not install the UPS system in direct sunlig
sources of heat.
•
Do not block ventilation openings i
housing.
71 / 181
Manual-ZintoA_final_ger_engl_it_20090929.doc
30/09/2009, Dipl.-Ing. S. Spitzley