UPS ZINTO A 1000, User Manual

Page: 90 / 181

NOTE:
om the cabinet manufacturer
ONLINE accessories (art. no.
Rack-Kit) can be used for rack mounting.
Either sliding rails fr
or from the range of
2.) The UPS is cooled by means of forced ventilation using
internal fans. Ensure there is a space of at least 30 cm
behind the UPS.
3.) Connect the UPS system to a wall socket (with earth con-
tact) using a VDE-tested and CE-marked mains cable. To
connect the ZINTO A 3000 please use the mains cable
supplied with the unit.
ATTENTION:
The output sockets on the UPS are live after
power up.
8.1 Tower installation
tower installation
ll models in the ZINTO A series can be used both vertically
a rack. ZINTO A 800, ZINTO A
1000 and ZINTO A 3000 comprise only one component in the
basic configuration. For ZINTO A 1500 and ZINTO A 2000 two
c
he basic
config
re numerous possible installation positions for ZINTO
ront
8.1.1 UPS single
A
as a tower and horizontally in
omponents are required for correct operation in t
uration: control unit and batterypack.
There a
A 1500 and ZINTO A 2000 due to the air vents on the f
and rear.
90 / 181
Manual-ZintoA_final_ger_engl_it_20090929.doc
30.09.2009, Dipl.-Ing. S. Spitzley