Rev.B15
Pg. 4 di 80
Important information
To guarantee a quick installation and set up of the device described in this
manual, we highly recommend that the following information and
explanations are carefully read and observed.
Qualified Personnel
The usage of the products described in this manual, are addressed exclusively
to qualified personnel in the PLC programming, electrical specialists or
people who act in place of specialized electricians and who are familiar with
the existing rules. UNIVER S.p.A. declines any responsibilities resulting from
improper actions and damages caused by the non-compliance to the
prescriptions contained in this manual.
Designated use
For each single application, the supplied components must work with the
appropriate Hardware and Software configuration. Adjustments are allowed
only for the possibilities explained in this manual.
Every change to the Hardware and/or Software and/or the not compliant use
of the components entails automatically the exclusion of liability by UNIVER
S.p.A. and loss of the guarantee.
For specific requests and/or configuration consult UNIVER S.p.A
Safety notes
Attention. Remove all supplies and wait for at least 1 minute before working
on the device and its modules.
In case of bended contacts, the affected module must be replaced, because its
long- term functionality may be compromised.
ESD (electrostatic charges)
The modules have electronic components that may be damaged by
electrostatic charges.
When working with the modules, make sure that the environment (people,
workstation, packages) are well grounded or antistatic.
Avoid touching metal parts such as gold connections
Do not supply the devices with voltage outside of the indicated range.
Remember to connect the ground to the device, since some internal
protections need such a connection to operate correctly.
No connection to the ground could damage the device.
Definitions
DI
Digital input
DO
Digital output
I/O
Input/Output
HW
Hardware
SW
Software
LSB
Less significant Byte
MSD
Most significant Byte
