PT630
Operation
Guide
Page
29
of
41
4.2 FEATURES
•
16-bit Microprocessor, 16Mhz Clock
•
Real Time Clock Integrated Circuit (IC)
•
512 KB, 1.5MB, 2.5MB, 4.5MB
CMOS (RAM) Memory.
•
26
alphanumeric rubber keys with
1
scanner trigger switch
•
128x64
pixel graphic backlit
LCD
with selection between
16-column by 4-line in 8x16 font and
20-column by 8-line in 6x8 font
•
Power by
Li-ion
@ 3.6V
880mAH
Rechargeable Battery-pack.
•
3V 190mAH Lithium Data Backup battery.
•
Power Low Status Indicator for Main and backup batteries.
•
256KB Flash ROM, 128k for DOS-based system, the other 128K for user application program use.
4.3 I/O
Ports
4.2.1 The PT630 has three interface ports:
An RS232 I/O serial port can be used to communicate with a host PC and normal
charge from RS232 cable when cable is connected with
9VDC/1A
power adapter.
Pin Signal Direction Description
1
DCD
Not
support
2
RXD
Input
Receive date
3
TXD
Output Transmit
date
4
DTR
Output
Data Terminal Ready
5
GND Reference
Ground
6
DSR
Input
Data Set Ready
7
RTS
Output
Request to send
8
CTS
Input
Clear to send
9 RI
Not
support
10 Bat(+)
11 Bat(-)
12 Ext
9V
4.2.2 Scanner
The PT630 has provision for an integrated high performance scan engine or CCD,
and a built-in decoder for reading bar code labels. There are one
scanner-trigger
switches above the keypad. The scanning window of the integrated unit sits flush
with the top surface of the portable terminal; with the PT630 standing in a right
side up position, the scanning beam, fires off upward.