PT630 Operation Guide
Page 15 of 41
______________________________________________________
3.2.2.8 SET
The
SET
command allows the user to set system date-time, select type of bar
code scanner, assign laser module scanning method, enable double
verification and specify whether to show power-on logo. Select the
corresponding number, 1-4, to invoke a function. Pressing the [CMD] and
then the [Alpha] key returns the portable terminal to the
User Mode
menu.
<SYSTEM SETUP>
1.DATE & TIME
2.SCANNER
3.DISPLAY
4.KEYPAD
5.EXIT
3.2.2.8.1 DATE & TIME Set System Clock/Calendar
DATE-TIME SETUP
1998/01/01
08:00:00
By selecting “1.DATE & TIME” in the SET menu, you can set the PT630 date and time. The date
and time can be used as the time stamp to be appended to an input data record
by an application program. The second line shows the current system date in
the format YYYY/MM/DD (year/month/day). For instance, 1998/01/01
indicates that date is January 1, 1996. If you want to reset the system date to
August 31, 1997, then enter [1],[9],[9],[7],[0],[8],[3],[1]. Or press the
[ENT]
key to skip the system
date setting.
The third line shows the current time. The setting method is similar to setting the date. The time is
expressed in the 24-hour system in the format HH:MM:SS (hours:minutes:seconds).
3.2.2.8.2 SCANNER
SCANNER
The bar code input interface of the PT630 is compatible to all major bar code
scanners that are available in the market including wand, CCD and laser diode
scanners. Use the [ ] key to toggle among
ENABLE
and
DISABLE,
then
press [ENT].
LASER TRIG MODE :
User can select whether pen is activate to read barcode label by one
trigger/one scan or flash scan.
If it is set
NORMAL
, laser beam will be emitted to scan barcode and it will stop
laser beam after successfully scan barcode. User need to release trigger key and
then press again to scan next label.
If it is set to
FLASH
, user just press trigger and then release it, then scanner will
automatically scan barcode. When it successfully read a barcode, scanner will
continuously emit laser beam to read next label. User can press trigger again to
stop automatic scanning.
LASER AIM
When PT630 is equipped with SE1200LR engine, user can use this setting to
activate aim beam before starting scanning barcode. It will be helpful for user to
focus target barcode label. Use the [ ] key to toggle among
ENABLE
and
DISABLE,
then press [ENT].
VERIFICATION
When label quality is not good, and then cause error decoding. You can
enable this function to let PT630 double verification input barcode. When it is
set
ENABLE
, PT630 read barcode label twice to compare if it read the same
data.
