PT630
Operation
Guide
Page
23
of
41
The PT630 enables FormCaching by default, the following settings also apply:
DATA FIELD DEFINITION: field number=2
Category Setting
Field #1 FIELD PROMPT
ITEM:
DATA LENGTH
32
DATA TYPE
ALPHANUM
DEVICE TYPE
BOTH
Field #2 FIELD PROMPT
QTY:
DATA LENGTH
4
DATA TYPE
NUMERIC
DEVICE TYPE
KEY ONLY
DATA RECORD DEFINITION
Category Setting
BETWEEN FIELD
Append screen
FIELD DELIMITER
,
RECORD FELIMITER
CR
DATE STAMP FIELD
NONE
TIME STAMP FIELD
NONE
FIELD DELAY
0
3.2.3.5
POWER or ON-OFF
The PT630 provides system power on/off feature. Once
5
is selected, user can define the
1.)RESUME, 2.)AUTO OFF, 3.)ALARM
1.RESUME
When the Resume function is enabled, the PT630 will resume program execution
from the last turn-off point when it is powered on again. The default setting is ON
(enabled).
1.
Press 1 (1.RESUME)
2.
At the STATUS SETUP Menu, use the [ ] key to select between
RESUME ON (enable Recovery) and RESUME OFF (disable recovery)
3.
Press [ENT] to complete the setting
2.AUTO OFF
Use the [ ] key to set auto-off timeout from 1 to 9 minutes. The PT630 will turn
itself off automatically after being idle for the time period specified in the
AUTO
OFF
setting. The default setting of
AUTO OFF
is 5 minutes. The auto-off feature is
disabled when set to 0 minutes.
A smart power management system is built in PT630 hardware and software to
conserve battery power. The PT630 power transition flow is as follows:
