PT630
Operation
Guide
Page
41
of
41
7.2
MAIN POWER BATTERY CHARGING WITH AC/DC ADAPTOR
(Regular/Normal
Charge)
When the PDT shows “Main battery low” message or icon , the battery pack in PT630 needs to be
recharged. Plug one end of an
AC-9VDC/1A
power adapter into the DC-jack of RS232 cable and
the other end into a wall outlet. The battery pack will be fully recharged after 2-3 hours
.
The PT630 uses an internal Lithium battery to back up the RAM memory and system real time
clock when the main battery stops supplying the required power.
7.3 MAIN BATTERY CHARGING WITH CRADLE
Connect power adapter to PT063 and insert PDT into the chamber of PT063. The battery of PDT can be
fully charged in about 2~3 hours and the status of battery charging is indicated by the LED on the front
panel of PT063.(please refer to PT063 manual for detail information. )
