PT630
Operation
Guide
Page
35
of
41
5.2.3 Downloading a file from Host to PT630 using the Kermit Server
This function downloads a file from host to the PT630.
On PT630:
•
Connect the RS-232 port of PT630 to the COM port of your PC by a null modem cable.
•
Press
[
⊙
]
key to power up the PT630.
•
Check the PT630 protocol and communication parameter settings.
•
Press and hold down [CMD] key for 2 seconds to enter User mode, then select “3.COM” in
User mode to enter Kermit server mode.(see On HOST to process file download from Host
side).
Note : You can press
[CMD]
and
[Alpha]
to exit Kermit server and return to Ready mode
On HOST:
•
Run KERMIT.EXE program on PC. The program is in the PT630 Communication Utility
Diskette
•
First set the communication parameters to match the portable’s, then invoke download
command by entering “SEND filename”.
•
Enter [Q] to return to DOS.