Unitech PT630, Operation Manual

Page: 34 / 42

PT630 Operation Guide Page 34 of 41
5.2.1 Downloading a Jobgen Pro application from Host to PT630
This function downloads an existent JobGen Plus application from host to the PT630.
On PT630:
•
Connect the RS-232 port of PT630 to the COM port of your PC by a null modem cable.
•
Press [
⊙
]
key to power up the PT630.
•
Check the parameter settings of protocol and communication parameters of PT630. These
settings must match the settings as defined in the configuration of JobGen Plus application
program. If AutoSeek baud rate function is enable on JobGen Plus’s PTComm Manager,
you don’t need to care about PT630’s baud rate setting, but Protocol setting should be set as
Multi and other’s communication parameter should be “N,8,1”.
On HOST:
•
Run JOBGEN Plus program.
•
Open Job file which is targeted to be run on PT630.
•
Press F4 key (or click Make Job icon, or select Built Make Job) .
5.2.2 Uploading JobGen Plus from PT630 to HOST
Having collected the data into the PT630, the user can upload one or more collected data files to
a PC.
On PT630:
• Connect the RS-232 port of PT630 to the PC’s COM port PC with a null modem cable.
•
Press [
⊙
]
key to power up the PT630.
•
Check the parameter settings of protocol and communication parameters of PT630. These
settings must match the settings as defined in the configuration of JobGen Plus application
program. If AutoSeek baud rate function is enable on JobGen Plus’s PTComm Manager, you
don’t need to care about PT630’s baud rate setting, but Protocol setting should be set as Multi
and other’s communication parameter should be “N,8,1”
On HOST:
•
Run JOBGEN Plus program.
•
Press F10 key (or click PTComm Manager icon, or select Tools PTComm Manager
•
Double click Portable icon on right-upper windows and it will list down all of files which is
stored on PT630
•
Click file which will be sent back to PC and drop it into left windows on right path.