66
Copyright 2014 unitech Electronics Co., Ltd. All rights reserved. Unitech is a registered trademark of unitech Electronics Co., Ltd.
Code 128 Message Length
Scan the bar codes below to change the message length. Refer to Message Length
Description (page 49) for additional information. Minimum and Maximum lengths = 0-80.
Minimum Default = 0, Maximum Default = 80.
Code 128 Append
This function allows the scanner to append the data from several Code 128 bar codes together
before transmitting them to the host computer. When the scanner encounters a Code 128 bar
code with the append trigger character(s), it buffers Code 128 bar codes until it reads a Code
128 bar code that does not have the append trigger. The data is then transmitted in the order in
which the bar codes were read (FIFO).
Default = Off
.
Code 128 Code Page
Code pages define the mapping of character codes to characters. If the data received does not
display with the proper characters, it may be because the bar code being scanned was created
using a code page that is different from the one the host program is expecting. If this is the
case, scan the bar code below, select the code page with which the bar codes were created
(see
Code Page Mapping of Printed Bar Codes
on page 117), and scan the value and the
Save
bar code from the Programming Chart on the inside the back cover of this manual. The
data characters should then appear properly.
