Unitec SSA-003, Manual

Page: 48 / 55

48
5 System troubleshooting analysis
1: Normal use method, Paper requirements, Content Error
Adjustment method.
1): Take the machine out the box, then put it on the iron case, the
rubber pad shall align at the hole. The machine
’
s after end shall
also shall subtend the square hole so that the wasted paper can fall
into the iron case successfully. The carton also can put into the iron
case as a wastebasket. It
’
s good for daily cleaning. At last,hanging
the card collection box over the side iron plate which back of the
machine.( Rotary Blade direction). Switch on the power, open the
machine (Voltage range 90v--260v). Spread the paper tray. Move
the paperboard to match the paper size. Revolve the left nut in
order to the adjust the paper elasticity. (Do not too tight). the
printed card paper's first column cutting place shall align at the
triangle mark. Press the
“
Model changeover
”
key to find the right
cutting specifications, then press the
“
Set parameter
”
key to set the
paper sheets.(Can put 1-12 pieces at once,do not put more than
red line).
2): Paper requirements:Paper thickness
：
0.25mm--0.35mm or
180gsm--350gsm.The paper shall be level.do not crimp or too
damp.the paper thickness must be the same , can not be skewed.
PDF 文件使用 "pdfFactory Pro" 试用版本创建 www.fineprint.cn