Unitec SSA-003, Manual

Page: 27 / 55

27
2-4-4 Way to change over the cutting mode
Continually press the mode switchover key till the desired mode
being appeared on the liquid crystal screen.
2-5 Parameter set-up
2-5-1 Set-up of the pieces to be cut
The set-up is necessary when several pieces of paper need to be
automatically cut in once time.
In the standby state, press <
▲
>key to increase the pieces and <
▼
>key to decrease the pieces.
2-5-2 Set-up of paper
In the standby state, when <Menu set> key is pressed, the
①
screen will show:
When
②
<Enter>key is pressed, the screen will show:
③
Press <
▲
> or <
▼
> key to select;
Press
④
<Enter> or <Exit> key to return to the standby state.
paper
card option
system option
setting loaded
A3+
A3
custom
PDF 文件使用 "pdfFactory Pro" 试用版本创建 www.fineprint.cn