Unitec SSA-003, Manual

Page: 39 / 55

39
b. Do not place too many papers on the said desk.
c. Paper feeding may be affected with the frontal end of the
paper rolled upward, do not put it in till its being flatted.
d. Do not place papers of different kinds at the same time, or
paper feeding may be affected.
e. Do not use plastic sealed paper, film coated paper, PVC
paper and those too thick or too hard, or the cutter may be
caused damaged.
（
3
）
Use of the assistant paper guide plate
In case of a narrower paper (as A4), please mount the
assistant paper guide plate, or remove it and keep it well for
spare use.
①
micro-adjusting nut of paper guide plate
②
left paper guide plate
③
micro-adjusting nut of assistant paper guide plate
④
assistant paper guide plate
⑤
right paper guide plate
（
4
）
Set-up of both right and left positions of paper
Move both left and right paper guide plates to suit the paper
size and the 2 triangle marks on the paper feeding tray
aligned with the center of the card cutting place in the first
line. Use the micro-adjusting nut on the paper guide plate to
adjust the paper tightnes
PDF 文件使用 "pdfFactory Pro" 试用版本创建 www.fineprint.cn