Unitary products group CPH 060, Installation & Operation Instructions

Page: 9 / 24

FORM 145.14-IOM1 (908)
9
JOHNSON CONTROLS
The water cooled coaxial condensers in these units have copper tubing and are NOT suitable for salt or brackish water.
Do not install these units outdoors, or in any area where the surrounding temperature may drop below 32ºF.
GENERAL DATA
Model 060A 096A 120A
Nominal Cooling(Ton) 5 8 10
Cooling Performance
Gross Cooling Capacity(Btuh) 64100 101800 126000
Design CFM 2000 3200 4000
Compressor-Type
Scroll
Number Used 1 2 2
Evaporator Coil-Type
Copper Tubes, Aluminum Fins
Face Area(sq ft) 5.28 9.17 9.17
Rows/FPI 3/13 3/13 3/13
Condenser-Type Coaxial
Number Used/Tons Capacity 1/5 2/4 2/5
Nominal Water flow rate (gpm) 15 24 30
Condenser Water Connections 1" FPT 1-1/4" FPT 1-1/4" FPT
Evaporator Fan-Type Centrifugal, Forward Curved
Number Used 1 2 2
Diameter x Width (in) 10x10 10x8 10x8
Drive Adjustable Belt
Motor HP (Standard/Oversize) 1/NA 1.5/2 2/3
Filters
Number Used-Size(in) 2-20x20x2
2-20x25x2
1-20x20x2
2-20x25x2
1-20x20x2
Condensate Drain Connection 3/4FPT
Weight 460 710 760
NOTE:
Cooling performance is rated at 80°F dry bulb 67°F wet bulb entering air temperature,
CFM listed, 85°F entering 95°F leaving water temperature, and water flow rate listed.
Gross capacity does not include the effect of evaporator fan motor heat.