manualshive.com logo in svg

Unique Prestige UGP-24V PC1 B, Installation And Owner'S Manual

The Unique Prestige UGP-24V PC1 B is a top-of-the-line product designed for utmost convenience and performance. Complete with advanced features and cutting-edge technology, this product ensures superior user experience. To fully understand its functionalities and benefits, don't forget to download the comprehensive "Installation And Owner's Manual" for free from our website.

Share
Download
background image

UNIQUE 24” PRESTIGE MODEL

GAS RANGE - NG & LPG CONVERTIBLE

READ AND SAVE THESE INSTRUCTIONS

Have the dealer where you purchase your new range install it or have him recommend 
a qualified installer. Installation must conform with local codes. In the absence of local 
codes, the installation must conform with the National Fuel Gas Code, ANSI Z223. 1-Lat-
est Edition in the U.S.A. or the CAN/CGA B149.1 or .2 Installation Codes in Canada. 

Installation & Owner’s Manual

 

 

 

 

 

 

 

 

 

 

 

 

This manual contains information for: 

 

Important Safeguards 

 

Installation 

 

Use and Care 

Certain ranges come equipped with special features. Determine from a study of 

your range which of the instructions given in this booklet pertain to your range. 

 

This booklet gives valuable instructions covering the installation, adjustment 

and use of your range.

 

 

 

 

 

 

 

 

 

 

 

How to Obtain Service and/or Parts 

When your range does not operate in accordance with the instructions in the manual, 

you should contact the dealer in your immediate vicinity for service. Or, the purchaser 

may contact the service organization noted on the warranty. 

 

 

 

 

 

 

Important 

TO THE OWNER OF THE RANGE: Retain this owner’s manual for future reference. 

TO THE INSTALLER: Leave this owner’s manual with the range. 

Read and Save These Instructions

 

Summary of Contents for Prestige UGP-24V PC1 B























































Reviews:

No comments

Related manuals for Prestige UGP-24V PC1 B

Bakers Pride XOB-212 Parts List preview
XOB-212
Brand: Bakers Pride Pages: 2
Officine Gullo GGS8P Installation And Use Instruction preview
GGS8P
Brand: Officine Gullo Pages: 24
Jenn-Air JER8885QAF Use & Care Manual preview
JER8885QAF
Brand: Jenn-Air Pages: 96
Parker VBA-11A Instructions For Use Manual preview
VBA-11A
Brand: Parker Pages: 13
Amana ACR4303MEB User Instructions preview
ACR4303MEB
Brand: Amana Pages: 16
GE Cafe CS980SN1SS Technical Service Manual preview
Cafe CS980SN1SS
Brand: GE Pages: 25
GE CHS985 Installation Instructions Manual preview
CHS985
Brand: GE Pages: 8
GE Café CS980SN Dimensions And Installation Information preview
Café CS980SN
Brand: GE Pages: 2
GE Cafe C2S985SETSS Installation Instructions preview
Cafe C2S985SETSS
Brand: GE Pages: 4
GE CC2S995 Owner'S Manual preview
CC2S995
Brand: GE Pages: 36
GE CGS985SETSS Dimensions And Installation Information preview
CGS985SETSS
Brand: GE Pages: 2
GE CC2S986 Owner'S Manual preview
CC2S986
Brand: GE Pages: 34
GE CleanDesign JBP62BMWH Dimensions And Installation Information preview
CleanDesign JBP62BMWH
Brand: GE Pages: 2
GE CS975SDSS Dimensions And Installation Information preview
CS975SDSS
Brand: GE Pages: 2
GE CBP400 Owner'S Manual preview
CBP400
Brand: GE Pages: 44
GE EGR2000 Owner'S Manual & Installation Instructions preview
EGR2000
Brand: GE Pages: 56
GE Double Oven Self-Cleaning Gas Ranges Owner'S Manual preview
Double Oven Self-Cleaning Gas Ranges
Brand: GE Pages: 56
GE CCHS995SEL1SS Owner'S Manual preview
CCHS995SEL1SS
Brand: GE Pages: 64

Brands by name

Popular brands

Load more brands